Ce logiciel est le premier d’une série de cours sur le BASIC. Ce langage est le plus utilisé en micro-informatique et se prête tout particulièrement à l’initiation des débutants en programmation.
Les cours se présentent sous la forme de programmes sur cassette. Une voix enregistrée vous guide progressivement à travers différents exercices et démonstrations graphiques, en vous donnant des explications et instructions précises.
Avec L’INITIATION A LA PROGRAMMATION EN BASIC I, vous vous familiariserez rapidement avec le clavier de l’ordinateur et apprendrez à utiliser une série d’instructions. A la fin des 6 cours que comporte cette cassette, vous pourrez réaliser vous-même vos premiers programmes.
(à partir de 10 ans)
Developer : Unknown Date : 1980 (according to cover) Distributed by : P.E.C.F. ATARI 9-11 rue Georges Enesco 94008 Creteil Cedex Notes : Both sides of the tape contains datas and voice :
The voice is recorded on both L/R channels while datas are only on the right channel.
The original quality is very poor : I don’t know what to blame between the quality of the tape, the original master or the original recording tools but the Atari failed to load programs quite often:
Side1 has been carefully restored using 7 original tapes recorded at 3 differents audio levels each, Altirra, a8cas and Audacity !
The major encountered problem were :
The need to keep synchronisation between the words of the lessons and the loading of the 5 basic programs.
The fact that for a same side, basic programs are not recorded at the same audio level.
Sometimes Altirra loads the program with C: SIO PATCH but not without it. And the contrary is also true. The goal was to make it load with or without SIO patch.
25 hours of work were necessary for this tape so i hope you will appreciate it 🙂
Side 1 : An unknow man is speaking.
Side 2 : An unknown woman is speaking.
Dump : Download ( 💡 huge file – 485 MB ) – Source Atarinside – Two .Wav files in stereo for datas+music/lesson.
Both files tested and 100% working with Altirra 2.80. If you don’t want to download the files, you can just watch the youtube videos below. How to run : Boot with Basic, load .Wav in your emulator, type CLOAD, return then RUN. Enable Cassette SIO Patch if you don’t want to wait.
